Now for a difficult step: gluing the skins on! I had to make sure while I was gluing to get everything lined up perfectly, or R2 would look shoddily done. For the skins I had to use special glue called PC 7 that is extremely strong.
To apply the glue I had to slather it on, leaving no gaps to ensure a strong bond. Once the gluing was finished I strapped it onto the frame and used a wet rag to remove the excess glue before it dried. The glue will take 2-4 days to dry, so it will be a while until I can move onto the next step: finishing the skins!
To apply the glue I had to slather it on, leaving no gaps to ensure a strong bond. Once the gluing was finished I strapped it onto the frame and used a wet rag to remove the excess glue before it dried. The glue will take 2-4 days to dry, so it will be a while until I can move onto the next step: finishing the skins!
RSS Feed